Laptops are the most used devices in this day and age. A good quality laptop gives you enough power to perform all your tasks with ease. You can work on it, play games, stream movies, and much more in a carefree manner. But you also want it to look as good as it can perform so people go for many different types of techniques to decorate their device and using stickers is one of them. Visit Best Gaming Laptops.
You can style up your laptop by using stickers of your choice. But if you want to use them again on another device or anywhere else, then it can be a problem because removing stickers from a device to reuse them is not an easy task to do. If you want to remove the stickers to reuse them again but don’t know how to then you are in luck. We are going to be sharing with you guys 7 pro tips for removing stickers carefully so they can be used again. Let us not waste anymore time and get right to it.
How to Remove Stickers from Laptops for Reuse?
Blow Dryer
Blow dryer is pretty easy and safe way to remove stickers without damaging them. You can use a heat gun or blow dryer to dry the adhesive or glue behind the sticker, which will then make it come off easily. But it is recommended that you use it moderately and from a safe distance because too much direct heat can damage the device itself. Use dryer with short intervals of a few seconds and when the glue bond becomes weak you can peel it off.
Use A Sharp Blade or Knife
Using a sharp blade or a knife can also do the trick pretty easily. Slide your nail or a knife on the side of the sticker so it can get loosen up a little. Then try to slide your nail under the tip of that sticker slowly but carefully. When you feel that the sticker will come off, start to remove it gently because it can also get teared up. Also, when you are using a sharp object, do not scrap the surface with force because it will leave unwanted scratches and damage on the body of your laptop which you don’t want.
Oil-based Substances
Oil-based substances like petroleum jelly, olive oil, mineral oil, or lotion are very useful when it comes to removing adhesives. It is also pretty good to remove any smudges of glue or dust from a surface. When you apply such substances on a sticker it will remove the adhesive from back and make it easy for the sticker to come off. But as you are doing it make sure you are not using too much substance as it will damage the sticker.
Wet Cloth
The next best thing to do if you want to remove the stickers from your laptop without damaging it is to use a piece of wet cloth. Make the cloth a bit wet and warm if you can, then gently rub the cloth on sticker till the adhesive becomes weak. Then pull the tip of sticker slightly and peel off the sticker. But don’t use too much wet cloth as it can ruin your laptop, or the water can get inside the internal components which is never good.
Solvent
This step is kind of like using an oil-based substance which we mentioned earlier. Cleaning solutions of solvents of mineral spirit and lighter fluids are also really useful and handy, when it comes to removing adhesive from a clear surface. Just use these solvents slightly on the edges of sticker and wait a few seconds. As the glue bond becomes weak you will be able to peel off the sticker.
Alcohol Wipes
As odd as it may seem, but alcohol wipes are also pretty useful in removing adhesive from a surface. It is mostly used to remove glue or other smudges from any device. You can rub it a few times on the sticker which you want to remove and see the magic happening. It will loosen up the sticker from edges which you can then remove easily.
WD-40s
For those of you who don’t know what a WD-40s is, it is basically a product which is mostly used to protect metal and also to lubricate just about anything. It can also be used to remove smudges and grease from a surface. But most people don’t know that it is also useful if you want to remove the stickers from your laptops. Apply a little of it on the sticker and let it sit for a minute or two. After that you can rub the sticker with a dry cloth and then peel of the sticker.
Some Things to Keep in Mind
Before you try to remove a sticker from your laptop to use it again, there are some things you should keep in mind.
- The first and most important thing is to not use unnecessary force on the surface. If you apply too much force or pressure it can damage your laptop in a major way, and you will be needing to spend big bucks to have it repaired.
- When you are using a liquid solution to remove the sticker make sure to use it in a very small amount and never use too much. Also, it is safe to apply the solvent on a cloth and then rub it on the sticker instead of using the liquid directly.
- While using a hair dryer never get too close to the laptop or never apply heat for a long period of time continuously. Apply minimum heat and with intervals of few seconds.
Final Word
These were some of the useful pro tips to remove stickers from your laptops to use again. All of these tips work really well and deliver great results. Next time you want to remove stickers to reuse, make sure to keep the above-mentioned things in mind and you will be good to go.
If you want to buy good quality laptops for yourself then make sure to visit saving buyers and choose from a wide collection on the best normal laptops and gaming laptops deals.
